Skip to content
GLAVGEOTECHGeotechnical engineering
+7 (495) 215-57-27Discuss your project
Site menu

MOSCOW & MOSCOW REGION

In-house soil laboratory

Obtain soil and groundwater properties for design and verification. We link sample identification and test conditions to the questions your designer needs to answer.

In-house soil laboratory: explanatory engineering diagram
Conceptual illustration. Not to scale.

What you receive

Test records identifying the samples, methods, conditions and measured properties.

Scope of work

Agree the methods and test conditions, check received samples, perform the specified tests and issue traceable results for interpretation by the project team.

What to send us

The purpose of the tests, sample list and identifiers, sampling locations and depths, preservation details and the parameters required by the designer.

Choose the work you need

Abrasion testing of coarse-grained soils

Evaluate resistance to abrasion in coarse-grained soil material. Sample preparation and the selected method must suit the material and the purpose of the assessment.

Explore this service →

Frost heave testing of soils

Determine frost susceptibility under specified laboratory conditions. Relate the results to groundwater, seasonal freezing and the foundation or pavement design task.

Explore this service →

Physical properties of soils

Determine the basic properties used to classify and describe the sampled soil. Preserve sample identity and condition so the results remain traceable to the borehole and depth.

Explore this service →

Hardening Soil model parameters

Plan laboratory tests around the constitutive model used in geotechnical analysis. Stress range, drainage conditions and sample quality influence the usefulness of the derived parameters.

Explore this service →

Groundwater chemical testing

Determine the chemical characteristics relevant to the groundwater assessment and project materials. Agree sampling, preservation and the requested indicators before collecting water.

Explore this service →

Dynamic soil properties

Obtain laboratory data for a defined cyclic or dynamic loading problem. Agree specimen quality, stress conditions and the parameters required by the calculation model.

Explore this service →

Chemical properties of soils

Test the soil chemistry relevant to environmental or construction material assessment. Define the requested indicators and sample handling requirements at the planning stage.

Explore this service →

Small-strain soil model parameters

Characterise soil response at small strains for an agreed geotechnical model. Coordinate test capabilities and stress conditions with the modeller before commissioning the programme.

Explore this service →

Soft soil creep parameters

Investigate time-dependent deformation where long-term settlement affects the project. Test duration, stress history and specimen quality need to match the modelling task.

Explore this service →

Mechanical properties of soils

Determine strength and deformation behaviour under specified laboratory conditions. The selected stress path and drainage conditions should represent the design problem.

Explore this service →

Rock testing

Assess the physical and mechanical properties of rock specimens. Document sample condition and preparation so laboratory results can be interpreted in their geological context.

Explore this service →

Soil parameters for geotechnical models

Turn an engineering calculation question into a targeted testing programme. Agree the constitutive model and parameter definitions before choosing tests.

Explore this service →

Uniaxial compression testing of rock

Measure the compressive strength of prepared rock specimens under the specified method. Specimen geometry, condition and loading procedure are recorded with the result.

Explore this service →

Hoek-Brown model parameters

Support rock mass modelling with relevant specimen test data and documented assumptions. Laboratory strength alone does not define the condition of the full rock mass.

Explore this service →

Weathering characteristics of coarse-grained soils

Assess the weathering characteristics of coarse-grained soil material using the agreed method. Record the material composition and sample preparation relevant to the result.

Explore this service →

Budget and programme

Quoted for your project

The number and condition of specimens, preparation requirements, test methods, loading or drainage conditions and test duration.

Guide prices and what they include

Schedule agreed for the scope

The proposal defines mobilisation, field or testing work, processing and the agreed deliverables. Access, source data and the required test or observation duration affect the programme.

Guide budgets are indicative. Final quantities, price, taxes and dates are confirmed in the project proposal.

Before you commission the work

Is a test record the same as a design parameter set?

No. A specimen result describes a particular test. Selecting representative parameters for a soil layer or numerical model requires interpretation and must be included in the agreed scope.

What if the initial information is incomplete?

Send what you have and describe the decision you need to make. We will identify which missing inputs matter for this service before agreeing the scope.

YOUR PROJECT

Request a scope and quote

Send the site address, project stage and the decision you need to make. We will review the available information and clarify the required work.

+7 (495) 215-57-27
info@glavgt.ru

Moscow, 5 Yuzhnoportovaya Street, Building 2.

Office and company details

Send your enquiry

Your enquiry is saved securely on our server. We will reply using the contact details you provide. Drawings or reports can be sent by email after we contact you.

Or email us directly